Lang range water finding geophysical resistivity meter
How to accurately find ground water?
The basic task of finding ground water is to find water storage structure, then through analysis to determine and infer its water volume, water level and water quality.
When looking for groundwater, the following points should be considered in general:
1. Clarify the requirements for water sources
2. Understand geological structure(by geophysical resistivity meter)
3. Find the water storage structure((by geophysical resistivity meter)
4. Choose a water location
Geophysical resistivity meter is a useful tool for locating and characterizing groundwater resources. They are commonly used in hydro geological studies, environmental assessments, and well drilling operations. By providing information on the depth, location, and quality of groundwater, water finding instruments help to improve water resource management and promote sustainable development.
Technical Specifications:
| Maximum transmitting power : | 6000W |
| Maximum voltage: | ±1200V(2400Vp-p) |
| Maximum current: | ±5A(over-current protection) |
| Power supply waveform: | duty cycle is 1:1.bipolar |
| Input impedance: | ≥50MΩ |
| Input voltage range: | ±24V, ±0.5% ±1LSB,24 bit A/D |
| Delay time: | 0.1~5s (programmable) |
| SP compensation range: | ±10V |
| Max current sampling resolution: | 0.02μA |
| suppression: | 8odB for 50Hz or 60Hz (industrial frequency interference) |
| current measurement: | 5A, ±0.2% ±1LSB,24 bit A/D |
| working temperature: | -10°C~+50°℃(Environmental),95 %RH |
| storage temperature: | -20°C~+60C(Environmental) |
| Power supply: | built-in 12V lithium battery(or external 12V power supply),more than 20 hours of continuous work |
| Internal transmitting power :(only WDDS-3) : | Max current is 300mA, |
| Max voltage is 200V |
| Weight:: | ≤4.2Kg(wDDS-2C);
≤5.5kg(WDDs-3C) |
| Dimension: | 270mm* 246mm* 175mm(WDDS-2C)
350mm*270mm * 200mm(WDDS-3C) |
| Tablet PC: | Windows 10 64 bit operating system,2GB memory,Bluetooh, USB |
Difference of WDDS-2C and WDDS-3C Resistivity meter
1. WDDS-2C is equipped with 7.4V lithium battery with automatic protection which can auto-power-off when battery voltage is lower than 6.6V.
2. WDDS-3C has a 7.4V lithium battery for working power and a built-in 48V high-voltage power supply as transmitting power supply. The 48V power can transmitting 50V, 100V, 150V, 200V DC high voltage
Product details:
FAQ
1. What is the WDDS-2C/3C digital resistivity meter?
The WDDS-2C/3C digital resistivity meter is a new generation of DC resistivity equipment that is based on advanced electrical equipment from BTSK for resistivity surveys. It adopts 32-bit microcontroller technology and 24-bit A/D technology development and is suitable for detecting metal and nonmetal mineral resources, city geophysical exploration, railway and bridge inspection, hydrology, and engineering geology.
2. What are the main features of the WDDS-2C/3C meter?
The WDDS-2C/3C meter is light and flexible, with an advanced transmitter and receiver designed into one unit. It has a large power supply, a wide range, and high precision, making it suitable for high-resistance areas. Additionally, it has an "infinite" pole on the panel and automated compensation for SP, drift, and electrode polarization. The over-voltage protection of the receiving part is up to 1200V, and it also has Bluetooth technology for wireless remote control.
3. What is the power supply capacity of the WDDS-2C/3C meter?
The WDDS-2C/3C meter has a power supply capacity of 6000W (1200V * 5A), making it suitable for high-resistance areas and providing deeper and better measurement results.
4. What is the compensation range of the WDDS-2C/3C meter?
The compensation range of the WDDS-2C/3C meter is ±10V for SP, drift, and electrode polarization.
5. How can the WDDS-2C/3C meter be controlled remotely?
The WDDS-2C/3C meter has Bluetooth technology, which enables the tablet PC to control the meter wirelessly.
Product Tags:
|
|
Ground Geo Resistivity Meter Geophysics Lang Range Water Finding Images
|
